Inspire Pro SD Firmware Update Guide
Follow the steps below to update your Inspire Pro SD firmware and ensure the best performance.
Firmware Update Steps
1. Prepare Your Instrument
Make sure the connection is stable and the battery level is above 80%.
2. Turn Off Inspire Pro SD
Long press the Main Knob to turn off Inspire Pro SD. Disconnect the USB cable.
3. Enter Firmware Update Mode
While the device is powered off, double-click the Main Knob. The red light indicates that Firmware Update mode is active.
4. Connect to Your Computer
Connect Inspire Pro SD to your computer using the dedicated USB cable.
5. Download the Firmware File
Click "Download Firmware" at the bottom of the page to download the firmware file.
6. Start the Firmware Update
Open the downloaded .exe/.dmg file. Check the firmware version and click "Start".
7. Complete the Update
When the progress bar reaches 100%, click "Finish". Disconnect the USB cable and restart the device.
Attention
- Do not close the update window during the update process. Keep the connection stable until the update is complete.
- If the update is interrupted or fails, restart the update process from the beginning.
Download Firmware
Download the latest firmware file and follow the steps above to update your Inspire Pro SD.
Download Firmware →
Why Titanium? The Bridge Material Behind Inspire Pro SD
Inside the ENYA INSPIRE PRO × Ozielzinho Signature Edition
6 comentarios
Is this firmware file also used for the AL? If so, why did you call it the Inspire Pro SD firmware instead of just “Inspire Pro Firmware”. Guys. I don’t want to “brick” my new guitar by installing improper firmware onto it. You should be clear about this stuff.