Inspire Pro SD Firmware Update Guide

1. Prepare Your Instrument

Make sure the connection is stable and the battery level is above 80%.

2. Turn Off Inspire Pro SD

Long press the Main Knob to turn off Inspire Pro SD. Disconnect the USB cable.

3. Enter Firmware Update Mode

While the device is powered off, double-click the Main Knob. The red light indicates that Firmware Update mode is active.

4. Connect to Your Computer

Connect Inspire Pro SD to your computer using the dedicated USB cable.

5. Download the Firmware File

Click "Download Firmware" at the bottom of the page to download the firmware file.

6. Start the Firmware Update

Open the downloaded .exe/.dmg file. Check the firmware version and click "Start".

7. Complete the Update

When the progress bar reaches 100%, click "Finish". Disconnect the USB cable and restart the device.

Attention

1. Do not close the update window during the update process. Keep the connection stable until the update is complete.
2. If the update is interrupted or fails, restart the update process from the beginning.

Download Firmware

Download the latest firmware file and follow the steps above to update your Inspire Pro SD.